menu_book Explore the article's raw data

The GRASP Lab[Institutes in Control]

Abstract

This article is authored by Nikolai Matni, assistant professor of electrical and systems engineering and GRASP Lab primary faculty member. These answers are a synthesis of responses collected from GRASP Lab members, including Prof. Mark Yim, Prof. M. Ani Hsieh, Prof. George Pappas, Prof. Dinesh Jayaraman, and our founder, Prof. Ruzena Bajcsy.

article Editorial Material

date_range 2024

language English

link Link of the paper

format_quote

Matni Nikolai

Sorry! There is no raw data available for this article.

Loading references...

Loading citations...

shopping_basket PURCHASE DATA

Effect of corrosion on flexural strength of reinforced concrete beams with polypropylene fibers

Abstract

An experimental study was performed to investigate the effects of polypropylene fibers on uncorroded and corroded reinforced concrete beams. Three different volume fractions of polypropylene fibers having 0, 0.5, and 1.5%, were tested at four corrosion levels of 0% and approximately 5, 7, and 9%. A full scale of an accelerated corrosion pool was used for the accelerated corrosion process. Reinforced concrete beams were used for an under monotonic bending test. The contribution of the actual corrosion levels of transverse and longitudinal reinforcement bars to the total corrosion levels were obtained from reinforcement bars fully extracted from concrete. Flexural strength, bond-slip, and moment-curvature relationships were examined for uncorroded and corroded reinforced concrete beams. A new model was developed to predict the flexural strength of corroded reinforced concrete beams. The proposed model for predicting the residual flexural strength of corroded beams was compared with test data published in previous studies. Furthermore, a novel model is presented for improved predictions between the actual and theoretically estimated corrosion mass losses, based on Faraday’s law, with the aid of fully extracted reinforcement bars. The model used to predict the flexural strength of corroded reinforced concrete beams with large sizes demonstrated good agreement with current and previously published literature data. In the case of corroded beams comprising differing amounts of polypropylene fibers, the performance of the corroded beams was limited by a fiber volume fraction of 1.5% at low corrosion levels.

article Article

date_range 2018

language English

link Link of the paper

Load-displacement...

A0 (xlsx)